I believe I have a great solution for you, but the rear crossbar of the Buyers Products ladder rack part # 3371501410 that you referenced was not designed to be easily removed. So a better option for your 2007 Chevy Silverado would be a TracRac Sliding Ladder rack that has the over cab extension like the part # TH43002XT-501EX. The rear bar can slide forward as needed to help with taller items like you mentioned.
If you have an 8 foot bed you'd instead want the part # TH43002XT-000EX,... view full answer...
To install the Curt Gooseneck Flat Plate # C65500 on your 2007 Chevy Silverado 2500HD you'll need the Custom Installation Kit # C61341.
The instructions for the plate are a little generic, but I added a clip of them for you to reference. You'll need to provide your own hardware for the installation. view full answer...
I assume you're speaking of the Andersen Ultimate 5th wheel connection that attaches to the gooseneck ball. According to Andersen, their Ultimate 5th wheel connection is indeed compatible with the Curt # C60712 Double Lock, Flip and Store Gooseneck hitch. I've linked you to an install video for the Curt gooseneck hitch. view full answer...
The Demco Hijacker SL Flat Deck # DM6076SL-FLAT will work on your 8 foot flat bed 2007 Chevrolet Silverado 2500. The base rails you'll need are # DM6012.
There isn't a bracket kit for flat bed trucks so you'll need to fabricate a way to mount the rails on the bed. view full answer...
Your Signature Series hitch will fit the Reese Elite underbed installation kit # RP30061. However, the installation kit will only fit short bed models of the 2007 Chevy Silverado 2500 new body style. If you have a long bed it will not fit and you would need to look at a different installation kit and hitch. Let me know if you do have a long bed and I can make recommendations for you. view full answer...
Whichever tuner you currently have installed in your truck will have instructions on how to change it back to stock.
After doing that, to install an Edge Evolution CS2 such as part # EP85350 that fits 2007 Chevy Silverado Classics with 4.8L, 5.3L and 6.0L V8 engines you only need to plug the OBDII connector into the vehicle port which is normally below the driver's side dash.
I have included a link to the installation manual of this tuner for you to check out as well. view full answer...
Since the Firestone Ride-Rite Air Helper Springs item # F2430 uses the same fittings as the air lift kits you will be able to use the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs item # AL52300. With this kit you can add braided air lines to your set up.
I also recommend the Air Lift WirelessAIR Compressor System for Air Helper Springs item # AL74000EZ. Air Lift's premium, wireless, onboard compressor system with Bluetooth allows you to fill... view full answer...
Fifth wheel brackets # RP50081 are actually for certain Ford trucks and will not fit your 2007 Chevy Silverado 1500 with 5-1/2 foot bed. The comparable brackets that do fit your truck (new body style) are # RP50064.
If you do not already have the rails then I recommend # RP50064-58 which is the complete kit. If you do already have some 10 bolt rails then you would also need bolt kit # RP58504 because the hardware is not meant to be reused.
With the 5-1/2 foot bed you would either have... view full answer...
The only 16" x 6-1/2" rim we have with a 6 on 5-1/2 lug pattern is going to be the HWT Split Spoke Trailer Wheel item # AM22658HWT which is aluminum. This is the only wheel wider than 6" that does not have the larger 8 lug pattern.
Depending on what size your tire is we do have a couple of 16" wheel tire combos with 6 on 5-1/2 lug patterns that are on steel wheels. I have listed them below both of these would make great spare tires:
Provider ST235/80R16 Radial Trailer Tire w/ 16" White... view full answer...
The Bargman 5th Wheel/Gooseneck 90-Degree Wiring Harness for Aluminum Truck Bed part # 54701-009 does not come with a "T" but it does plug into the Fords factory fifth wheel towing package and still allows you to retain the use of the rear factory 7-Way plug. The wiring is designed for 2011-2020 Ford F-250 Super Duty with a fifth wheel towing package. The Bargman 5th wheel/gooseneck wiring plugs into two plugs under the bumper that are there specifically for fifth wheel towing from Ford.... view full answer...
If the brake actuator on your boat trailer has an electric reverse lockout solenoid like part # T4748800 and you were using the 7-way side of the 7- and 4-Pole Trailer Connector Socket part # HM40975 then yes, the brakes would release while in reverse. However, in order to use this harness on your vehicle you will need to have a U.S. car connector plug like part # C56229 already installed. If not then you can use something like part # C57187 to release the brakes on the trailer while in... view full answer...
Per the fitguide on our website, the Curt # 31322 would be a fit for the 2007 Silverado new body 1500 model only. For a 2500, you'll want to use # 31109. I've confirmed with with Curt.
Draw-Tite also offers the # 65050 which will sit up higher, just under the bumper, instead of just under the fascia, so you'll have better ground clearance at the front if you went this route. I've confirmed this fit with the folks at Draw-Tite.
The installation videos for each hitch that I've linked will... view full answer...
Thanks for that info and we do have the replacement you need. For your 2007 Chevy Silverado with an 8 foot bed with a TruXedo TruXport Tonneau Cover # TX271601, the correct replacement tarp is:
- Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover # TX2716-CVR view full answer...
For a tonneau cover that is compatible with your 2007 Chevrolet Silverado 1500 with a 5-1/2 foot bed I recommend the TruXedo Pro X15 Soft Tonneau Cover # TX1470601
The # TX1470601 is a low-profile cover that sits inside your truck bed rails, and I have linked below a review video of this cover for you. view full answer...
The Curt hitch part # 13339 that you referenced is not a confirmed fit for your 2007 Chevy Silverado 1500 New Body so for a similar hitch that does fit you'd want the part # 13301.
The # 13339 that you referenced fits the higher payload versions of your truck that also have a deep drop bumper. view full answer...
Without knowing exactly what brush guard(make and model) you acquired I will not be able to verify the correct mounting hardware for your rack. A guard like the Aries Grille Guard # AA4068-2 for your 2007 Chevrolet Silverado 1500 is specific to this make and model of truck. It will only fit this particular model truck with its mounting hardware. You would not be able to install it on a different make/model truck by using different hardware. view full answer...
The Bully Black Bull Chevy Bowtie Cover you mentioned, part # ST-175 is a confirmed fit for the 2007-2011 New Body Style Chevy Silverado. It's designed to fit over the bow tie emblem on the front grille. view full answer...
Access states that you can use the Vanish Roll-Up Tonneau Cover, # 834532007875, with a spray-in, over the rail bed liner. If it were a drop in over the rail bed liner you would have to trim the bed liner to install the cover. Spray-in bed liners will not have to be trimmed.
I have included a link to all of the tonneau covers for the 2007 Chevy Silverado New Body. Just select the bed type and length to see the available options. view full answer...
Are you looking for a 7-way to plug into your round connector on your 2007 Chevy Silverado 1500 New Body? That's what it sounds like, and if so, use the Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors # 30955. view full answer...
Yes, the Thule TracRac CapRac part # TH29200XT would fit the tracks on your Leer canopy. That's basically what this rack was designed to for. view full answer...